Shanghai Xinrong Composite Materials Co., Ltd.

Hohhot
Inquire about the price of steel glue?
Manager Liu

<
Manufacturer
Straight line
Factory direct sales, quality assurance
Our company mainly produces carbon fiber cloth, carbon fiber cloth glue, carbon fiber board, aramid fiber cloth, steel glue, reinforcement glue, joint filling glue, steel filling glue, seam sealing glue.
//
Our company is a company specializing in the production of carbon fiber reinforcement materials, building structure reinforcement, reinforcement and other construction and sales agents. It integrates well-known domestic and foreign brand reinforcement materials and technical equipment with special professional engineering contracting (structural It is a high-tech enterprise with qualifications for reinforcing steel and reinforcing steel. Through several reinforcement and reinforcement projects of bridges, tunnels, highways, industrial plants, civil buildings, water conservancy facilities, and municipal projects, the company has built a professional team with complete personnel, sophisticated equipment, and excellent technology. Due to its excellent project quality, abiding by contracts and credibility, and the dedication and dedication of the construction team, it has won the trust of owners, design, quality inspection, supervision, and construction units, and has achieved good social and economic benefits.
1.
Product Features
High bonding strength.
, chemical corrosion resistance, anti-aging.
, suitable for horizontal and vertical surface applications.
, good mechanical properties under high temperature environment.
, suitable for high load-bearing strength requirements, and has excellent long-term creep resistance.
2. The mixing ratio of steel glue
The adhesive is prepared according to a certain proportion (weight ratio of main agent and curing agent). Place the main agent and curing agent in a container one after another and stir with a stirrer. Uniformly, the dosage is determined according to the actual temperature on site, and the use time is strictly controlled. The prepared rubber must be completed within minutes.
3. Instructions for use
Remove the floating ash, dust, oil stains and dirt on the old concrete surface. If there are honeycombs and cracks on the surface, they should be repaired and the bonding surface to the steel plate should be leveled. Carry out smoothing and rust removal treatment.
When preparing the glue, strictly follow the proportions of the components, stir thoroughly and evenly, and there should be no precipitated color difference. The container should be clean, and there should be no dust, moisture and oil stains mixed in. Mechanical stirring must be used to ensure that the components are properly mixed. Mix evenly
and apply the prepared glue on the treated concrete and steel plate surfaces with a spatula at the same time (when applying glue, the horizontal paste should be thick in the middle and thin on the edges, and the vertical paste should be thick at the top and thin at the bottom, and there should be no (missing smear), then stick the steel plate to the predetermined position, and tap gently along the pasting surface with a hammer. If there is no hollow sound, it means that it has been pasted tightly. Otherwise, the steel plate should be peeled off, re-glued and re-pasted.
After the steel plate is pasted, it should be fixed under pressure until the glue liquid overflows around the steel plate at the same time. The steel plate must not be partially decompressed during the pressurization. The pressure can be relieved after an hour when the pressure is above ℃, and it can be used under stress after a few days. If it is lower than ℃, artificial heating or extended curing waiting time can be used. After curing and pressure relief, rust prevention should be done. Anti-corrosion treatment.
4.
Notes
Components A and B must be stirred evenly before use.
When using this product, if it accidentally splashes into your eyes, rinse with clean water or seek medical advice immediately.
, Fireworks are strictly prohibited on site! The pasted steel parts are protected from long-term exposure to high temperatures (above ℃).
When not in use, do not mix components A and B. Do not put the mixed glue back into the original bucket.
Can be shipped nationwide, no need to worry about transaction issues, cash on delivery, freight is borne by the manufacturer.
Welcome to call us, Manager Liu
Manufacturer
Direct Line